Forms high strength conductive bonds
This two part silver epoxy offers high electrical conductivity and strong conductive bonding. Use in place of traditional soldering on heat sensitive components. Good for repairing defective traces and creating jumpers on boards. Can be used as an effective heat sink adhesive. This Conductive Silver Epoxy comes in two 7g syringes.
| Specification |
Test Method |
Result |
| Minimum operating temp. |
|
-30°C ( -22 °F ) |
| Maximum operating temp. |
|
90°C ( 194°F ) |
| Cure time @ 24°C (75°F) |
|
5 hours |
| Cure time @ 65°C (150°F) |
|
15 minutes |
| Working time @ 22°C |
|
10 minutes |
| Mixing Ratio |
|
1:1 |
| Volume resistivity @ 25°C |
MIL-STD-883E Notice 3, method 5011.4, paragraphs 3.5.8, 3.8.11.1 (Covered Under A2LA Accreditiation) |
0.38 ohm · cm |
| Tensile strength |
ASTM-D-638-02A |
911 psi |
| Elongation |
ASTM-D-638-02A |
0.3 % |
| Compressive Strength |
ASTM-D-695-02A |
1100 psi |
| Flexural Strength |
ASTM-D-790-03 |
2,500 psi |
| Shear Strength |
ASTM-D-732-02 |
234 psi |
| Cantilever Beam (IZOD) Impact |
ASTM-D-256-02 E1 |
0.39 ft lb ft / in |
| Thermal Expansion |
ASTM-E-831-03
|
79.3 mm/106mm |
| Density |
ASTM-D-256-02 E1 |
2.34 g/cm3 |
| Thermal Conductivity |
ASTM-C-518 |
0.578 W/m · °K |
|
View Material Safety Data Sheet 8331A
View Material Safety Data Sheet 8331B
MG Chemicals RoHS Statement
